How To Select Cone Crusher Liners And When To Replace Them

Press Released: 09 May 2022: Over a century ago, designers created Cone Crusher linings. These machines provide tertiary, secondary and quaternary reduction. Each one features an crushing chamber that breaks rocks into smaller pieces. It can be difficult to figure which Cone Crusher liners and when to change them. We'll break things into pieces for you.

How To Choose

When choosing a Cone Crusher liner, the feed must be taken into consideration first. The Cone Crusher liner should be well-graded and flow through the chamber for crushing. It typically includes:

90 to 100 percent passing the feed opening on the closed side.

The midpoint is 40-60 percent

0 to 10 percent leaving the closed-side setting

You must match the complete feed gradation, not just the feed shape. It is important to use the whole chamber. This will result in the desired output and decrease.

Make sure that the cavity opening isn't which is too large in comparison to the top feeder size. To prevent incorrect alignment of the bearings, be aware of a size of feed that is too small. Do not crush the bottom of the cavity. The liner's bottom will wear away quicker than the upper. For more details visit here crusherparts.org.

It is possible to select the best liner to meet your needs by knowing the crusher's gradation.

When To Change

Liners that have gone beyond their lifespan will result in mechanical problems with the crusher. These are indicators that it is time to change your liner.

Liner Thickness

You should consider replacing the liner if you notice it's not wear evenly. If you continue to use it once it has reached this amount of thickness the liner will begin to crack and the backing material will begin to break down.

Production Level

If you see a 10 percent decrease in production levels or more, that's a good clue that you should change the Cone Crusher liner. Your liners may come with an automatic liner reminder that will stop you from playing guessing games.

How to Determine Liner Use

It's cheaper to replace liners when they're required. If you use the liners too long, you may wear through the liners completely and start to damage the crusher head itself that could result in a costly repair. Replace them too early and the cost shifts to the cost of wasting production time, along with the expense that are associated with a premature replacement of the liner.

It is more likely that the liners wear unevenly and require to be replaced to protect the machine, even when it isn't able to be used at its fullest.

It is essential to know the best way to track the progress you have made and what your goal for utilization is to make sure you're using your liner at full capacity.

In a Metso HP-style crusher the ideal usage goal is between 50 and 55 percent of the liner. Symons-style crushers must have the goal of utilizing 60-65 percent to maximise liner use prior to replacement.

To figure out the utilization of liner, weigh the liners before they are installed. After removal then weigh them once more. The percentage of utilization is calculated by subtracting their used weight from their original weight and then dividing by the original.

You now know how to select cone crusher liners and when they must be changed. Regular maintenance is important to ensure your liner's longevity.

Hunan JY Casting

Address: Gantang town Industrial Park, Shuangfeng County, Loudi City, Hunan Province, China

E-mail: info@www.crusherparts.org

Tel: +86 15251744209

Whatsapp: +86 15251744209